Castle Creations 1/8 Mamba Monster 2/Neu-Castle 2650kV

This is the Mamba Monster 2 25V Electronic Speed Control and the Neu Castle 1512 1Y 2650kV Motor, from Castle Creations.

FEATURES

Neu Castle 2650kV Brushless Motor;

• High quality oversized ABEC-1 front and rear ball bearings
• Sintered Neodymium magnets
• 6.5mm gold connectors with 10 gauge wires (OK to shorten)

Mamba Monster 2 25V ESC;

• Compatible with on-road vehicles and buggies, running up to 4S LiPo batteries and weighing up to 9lbs (4.0kg)
• Waterproof design allows running in nearly any environment (see COMMENTS below)
• Profiles can be custom designed on a PC with the Castle Link
• PC programming software (software not included, can be downloaded for free from Castle's website, voucher is included for free Castle Link Programmer)
• Solder posts allow battery wire length and direction to be easily changed
• One year limited warranty through Castle Creations beginning at date of purchase. Warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage or overloading

INCLUDES

• Mamba Monster 2 25V ESC with Cooling Fan
• On/Off Switch
• Fan Plug
• Motor Wires
• Receiver Wire with Connector
• Instructions
• 2650KV Neu Castle Brushless Motor with 10 Gauge Leads
• Connectors and Instructions 
• Voucher for free Castle Link Programmer

SPECIFICATIONS

ESC, CSEM0800

• Input Voltage: 2S-6S LiPo
• BEC: User selectable output between 5 and 7 volts
• Brake: Proportional
• Revesible: Yes, with lockout
• Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
• Weight: 3.93oz (111.5g) without battery connector 

Motor, CSEC0500

• Max Input Volts: 16.8
• Amp Rating: 120
• Weight: 13.1oz (370g)
• Motor Diameter: 1.57" (39.98mm) 1.64" (41.78mm) with fins
• Motor Length: 2.7" (68mm)
• Shaft Diameter: 0.197" (5mm)
• Ball Bearings: Oversize ABEC-1 front and rear
• Connector: 6.5mm gold

NOTE

Not intended for use while submerged in liquid. Fan on ESC is not water resistant. Remove fan from ESC before exposing vehicle to liquids.