Traxxas Stampede 2WD BL-2s RTR 1/10

Traxxas Stampede 2WD BL-2s puts brushless speed and durable construction into an easy-to-drive, ready-to-run 1/10 monster truck. Built for beginners and weekend bashers, it pairs waterproof electronics with a rugged chassis so you can drive through rough terrain and wet conditions; note that battery and charger are sold separately.

Key Features

• Clipless monster truck body — Smooth, post-free styling that removes quickly for maintenance and holds tight during aggressive driving.
• LED-ready front and rear bumpers — Bumpers accept lighting accessories for night runs or show builds.
• Included wheelie bar — Helps control wheelies when applying throttle on hard launches.
• Body reinforcements — Reinforced areas reduce pull-through damage during heavy impacts or rough landings.
• Quick removal — Clipless design makes body removal and reinstall fast when you need access to electronics or battery.
• Waterproof BL-2s electronic speed control — Fully sealed speed controller with a heat sink that accepts an optional cooling fan.
• Three programmable drive profiles — Sport Mode (forward/brake/reverse), Race Mode (forward/brake), and Training Mode™ (patented 50% forward/brake and 50% reverse) let you tune behavior for skill and conditions.
• EZ-Set one-button setup — Simple button programming gets the ESC into the profile you want without complex menus.
• Battery compatibility — Works with NiMH packs (6–7 cells, 7.2–8.4 volts) and 2-cell LiPo packs; built-in two-stage low-voltage detection helps protect batteries.
• BL-2s brushless motor (3300 Kv) — Sensorless brushless design with an integrated cooling fan and efficient ball bearings for long life and strong performance.
• Low-maintenance motor — Designed for reliable operation with minimal upkeep.
• Extreme heavy-duty parts installed — Strengthened C-hubs, axle carriers, and steering blocks reduce breakage under hard use.
• HD suspension arms — Reinforced arms stand up to rough terrain and aggressive driving.
• Extra-strong driveshafts — Driveshafts use added material and a beefed-up design to resist bending and snapping.
• TQ 2.4 GHz 2-channel radio system — Ergonomic transmitter with an internal antenna gives precise control and a clean profile.
• Traxxas 6519 micro receiver — 3-channel receiver with fail-safe security for safe, predictable behavior if signal is interrupted.
• Watertight receiver box — O-ring seal keeps the receiver dry during wet or muddy runs.
• Easy-access battery compartment — Adjustable hold-down accepts 6- and 7-cell flat packs, 7-cell hump packs, and many 2S LiPo layouts for flexible pack choices.
• Velineon-ready Magnum 272 metal-gear transmission — Metal gears handle higher torque and are prepared for Velineon-class motors.
• Torque-Control slipper clutch — Protects drivetrain components by letting the slipper slip under extreme loads.
• Planetary gear differential — Steel ring gear provides durable power transfer and predictable traction behavior.
• Sealed gearbox — Protects internal gears and includes a beefed-up motor guard for added shielding.
• External gear cover — Provides easy access to the slipper clutch for quick adjustments or maintenance.
• Fiber-composite monocoque chassis — One-piece chassis construction for consistent alignment and impact resistance.
• Tall 4" center ground clearance — Plenty of clearance to drive over rocks, roots, and yard obstacles.
• Steering — High-torque Traxxas 2056 steering servo with a spring-loaded servo saver to reduce shock to steering components.
• Suspension — Solid camber links remove the need for frequent camber adjustments and captured rod ends resist popping off under load.
• Ultra Shocks with X-ring technology — Fully adjustable, oil-filled shocks with X-ring seals for consistent damping and long service life.
• White powder-coated springs — Durable finish resists corrosion and keeps a clean look.
• Wheels and tires — Pre-glued high-profile Talon all-terrain tires with performance foam inserts mounted on 2.8" All-Star wheels for ready traction.
• Rubber-sealed ball bearings — Bearings throughout the drivetrain reduce friction and keep contaminants out.
• Precision hex hardware — Machine-fit hex screws and fasteners for reliable assembly and serviceability.
• Battery and charger sold separately — Power components are not included, so pick packs and a charger that match your driving style.

Technical Specifications

• Model Name: Stampede 2WD BL-2s HD
• Type: Monster Truck
• Top Speed: 30+ mph with 7-cell battery
• Skill Level: 1 (beginner)
• Scale: 1/10
• Weight: 4.08 pounds (1.85 kg)
• Length: 16.25 inches (413 mm)
• Width: 12.75 inches (324 mm)
• Front Track: 12.75 inches (324 mm)
• Rear Track: 12.75 inches (324 mm)
• Height: 9.5 inches (241 mm)
• Wheelbase: 10.63 inches (270 mm)
• Center Ground Clearance: 4 inches (102 mm)
• Driveline: 2WD
• Transmission: Magnum 272 metal-gear transmission
• Differential Type: Planetary steel gear
• Gear Ratio (Internal): 2.72 (final drive: 12.34)
• Gear Pitch: 48 pitch
• Steering Servo: 2056 high-torque waterproof
• Radio System: TQ™ 2.4 GHz 2-channel radio
• Battery Compartment: 164 mm x 46 mm x 26 mm
• Motor Name: BL-2s 3300 Kv
• Motor Type: Sensorless brushless
• Motor Weight: 7.51 ounces (213 g)
• Motor Length: 3.15 inches (80 mm)
• Motor Diameter: 1.42 inches (36 mm)
• Motor Shaft Size: 3 mm
• Motor Connector: Traxxas Quick Connect Motor Plug
• ESC Name: BL-2s Electronic Speed Control
• ESC Type: Brushless
• ESC Case Size: 1.53" (39 mm) x 2.31" (59 mm) x 1.21" (31 mm)
• ESC Weight: 3.07 ounces (87 g)
• ESC Motor Connectors: Traxxas Quick Connect Motor Plug
• ESC Battery Connectors: Traxxas High-Current Connector

The Traxxas Stampede 2WD BL-2s balances accessible controls and strong hardware, making it a sensible pick for new drivers who want brushless speed and for experienced hobbyists who want a dependable bash truck. With sealed electronics, reinforced drivetrain parts, and adjustable shocks, it’s set up to handle rough terrain and high-energy runs; pick your battery and charger to match the driving style you want.