Traxxas BIGFOOT No. 1 BL-2s Monster Truck RTR 1/10 (Blue)

Traxxas BIGFOOT No. 1 BL-2s Monster Truck brings classic Bigfoot presence and modern brushless performance to a ready-to-run 1/10 monster truck. It ships with waterproof BL-2s electronics, a 3300 Kv BL-2s brushless motor, and heavy-duty drivetrain parts so you can tackle yards, tracks, and trails out of the box. Battery and charger are sold separately.

Key Features

• Licensed BIGFOOT No. 1 clipless body — Officially licensed F-100 Ford XLT Ranger styling in brilliant blue metallic for authentic Bigfoot looks without body posts or clips.
• Chrome front bumper with a replica winch for that vintage monster-truck appearance and added front-end detail.
• Chrome grille with molded light buckets and reflectors that keep the scale appearance crisp on camera and at the track.
• Replica high-rise dual-carb intake manifold adds period-correct engine detail under the hood.
• Chrome roll bar fitted with replica KC-style lights for that classic trophy-truck silhouette.
• Body reinforcements built into the shell to prevent pull-through damage during hard landings.
• Secure clipless mounting holds the body tight during aggressive driving while still allowing quick, tool-free removal.
• Smooth, clean body appearance with no exposed posts or clips; includes a wheelie bar for control during acceleration.
• BL-2s waterproof electronic speed control — Compact ESC with a heat sink that accepts an accessory cooling fan and Traxxas EZ-Set one-button setup for easy configuration.
• Three programmable drive profiles: Sport (forward/brake/reverse), Race (forward/brake), and patented Training Mode (50% forward/brake and 50% reverse) to tailor handling to skill level.
• ESC compatible with NiMH and LiPo packs and features two-stage low-voltage detection for safe battery use.
• NiMH battery compatibility: 6-7 cells (7.2–8.4 V). LiPo compatibility: 2-cell configurations.
• BL-2s brushless motor (3300 Kv) — Sensorless design with an integrated cooling fan and efficient ball bearings for low upkeep and strong performance.
• Extreme heavy-duty parts installed from the factory: strengthened C-hubs, axle carriers, and steering blocks plus heavy-duty suspension arms.
• Extra-material, heavy-duty driveshafts add strength where bashing stress is highest.
• TQ 2.4 GHz 2-channel radio system — Ergonomic transmitter with internal antenna paired with the Traxxas 6519 3-channel micro receiver with fail-safe security.
• O-ring sealed, watertight receiver box helps keep the electronics dry in wet conditions.
• Easy access battery compartment with adjustable hold-down accepts 6- and 7-cell flat packs, 7-cell hump packs, and many 2S LiPo layouts for flexible battery choices.
• Transmission and driveline — Velineon-ready Magnum 272 metal-gear transmission mated to a Torque-Control slipper clutch and a planetary differential with a steel ring gear.
• Sealed gearbox plus a beefed-up motor guard protect the transmission; external gear cover provides easy clutch access for maintenance.
• Tough fiber-composite monocoque chassis that gives a centered, low-profile layout and 4.00" center ground clearance to roll over obstacles.
• Steering uses a high-torque Traxxas 2056 waterproof servo with a spring-loaded servo saver to reduce impact damage to the drivetrain.
• Suspension features solid camber links that remove the need for frequent adjustment and captured rod ends that resist popping off.
• Springs and shocks — Fully adjustable oil-filled Ultra Shocks with X-ring seals and white powder-coated springs for consistent damping.
• Wheels and tires come ready: pre-glued high-profile Terra-Groove shaved monster-truck tires mounted on 2.2" deep-dish, mirror-chrome beadlock-style wheels.
• Rubber-sealed ball bearings throughout for smooth operation and reduced wear.
• Precision hex hardware used across the build for secure, repeatable assembly.
• Battery and charger are sold separately.

Technical Specifications

• Model Name: BIGFOOT No. 1 BL-2s HD
• Type: Monster Truck
• Scale: 1/10
• Skill Level: 1
• Top Speed: 30+ mph with a 7-cell battery
• Weight: 4.08 pounds (1.85 kg)
• Length: 16.25 in (413 mm)
• Width: 12.75 in (324 mm)
• Front Track: 12.75 in (324 mm)
• Rear Track: 12.75 in (324 mm)
• Height: 9.5 in (241 mm)
• Drivetrain: 2WD
• Transmission: Magnum 272 metal-gear transmission
• Differential Type: Planetary steel gear
• Gear Ratio (internal): 2.72 (final drive: 12.34)
• Gear Pitch: 48 pitch
• Steering Servo: 2056 high-torque, waterproof
• Battery Compartment: 164 mm x 46 mm x 26 mm
• Motor: BL-2s 3300 Kv (sensorless brushless)
• Motor Weight: 7.51 oz (213 g)
• Motor Length: 3.15 in (80 mm)
• Motor Diameter: 1.42 in (36 mm)
• Motor Shaft Size: 3 mm
• Motor Connector: Traxxas Quick Connect Motor Plug
• ESC: BL-2s Electronic Speed Control (brushless)
• ESC Case Size: 1.53" (39 mm) x 2.31" (59 mm) x 1.21" (31 mm)
• ESC Weight: 3.07 oz (87 g)
• ESC Motor Connectors: Traxxas Quick Connect Motor Plug
• Battery Connectors: Traxxas High-Current Connector

What's Included

• Pre-mounted BL-2s brushless motor and BL-2s electronic speed control
• TQ 2.4 GHz 2-channel transmitter and Traxxas 6519 micro receiver
• Pre-glued Terra-Groove monster tires on mirror-chrome beadlock-style wheels
• Wheelie bar and replica scale details already installed
• Vehicle assembled and ready to accept battery and charger (both sold separately)

Why Choose the BIGFOOT No. 1 BL-2s

This Traxxas BIGFOOT No. 1 BL-2s Monster Truck blends iconic scale looks with modern, low-maintenance brushless power and a beefed-up drivetrain for serious backyard bashing. It’s friendly for first-time RC drivers while offering parts and performance that experienced hobbyists will appreciate—especially if you plan to run in wet or rough conditions thanks to the sealed electronics and beefed-up hardware.