Traxxas Revo Monster Truck Nitro 3.3 RTR 4WD

Traxxas Revo Monster Truck Nitro 3.3 is a 1/10-scale ready-to-run machine that brings big nitro power and durable construction to backyard bashing, track sessions, or off-road fun. The long aluminum semi-monocoque chassis and reinforced engine brace handle the output of the 3.3 racing engine while the TQi Link radio and factory telemetry let you tune performance from a phone or tablet.

Key Features

• 6061-T6 aluminum 3mm chassis — semi-monocoque design that's 1.2" (30mm) longer than the Revo 2.5 for extra stability and includes an engine brace plus integrated roll hoop and carry handle.
• Four-wheel drive — full traction for loose surfaces, jumps and steep terrain.
• Shaft-driven drivetrain — .71" (18mm) diameter shafts with rubber-shielded half shafts and stub-axle bearings for dependable power delivery.
• Traxxas .20 cu in (3.3cc) racing engine — slide-valve carburetor, EZ-Start system and twin high-flow dual-stage air filters for consistent power and easy starts.
• EZ-Start battery and charger — 1500mAh 6-cell pack supplied with charger for quick engine starts out of the box.
• Polished dual-chamber tuned pipe — aluminum resonator that improves power band and sound control.
• Low-profile fuel tank — 5.1oz (150cc) capacity with flip-top cap for tidy installation and easy refueling.
• TQi Link radio system — high-output transmitter with Traxxas Link Wireless Module for Bluetooth connectivity to the Traxxas Link app and real-time telemetry.
• App-enabled tuning — adjustable steering/throttle expo, dual rates, servo reversing, endpoint adjustment and profile sharing via phone or tablet with a 5-channel receiver and three telemetry ports.
• Two-shoe composite clutch — proven design for smooth, progressive engagement under load.
• OptiDrive electronic transmission control — automatic, gentle gear engagement for forward and reverse shifts.
• Full set of ball bearings — rubber-sealed bearings used in exposed locations for long life and lower friction.
• GTR inboard shocks — four maintenance-free, silicone oil-filled units with hard-anodized bodies and TiN-coated shafts for consistent damping.
• 38-tooth main gear — durable plastic gear driving the transmission.
• Sealed front and rear gearboxes — keeps dirt and debris out for longer service intervals.
• Maintenance-free diffs — sealed with silicone X-rings and gaskets; limited-slip feel can be tuned with different oil viscosities.
• Powerful braking system — alloy calipers with 1.6" (40mm) drilled and vented steel rotors and semi-metallic friction material for strong stopping power.
• Maxx-compatible tires — 6.3" (160mm) outer diameter with foam inserts, 3.3" (84mm) width and 3.8" (96mm) inner diameter for big-vehicle traction.
• Chrome Geode wheels — 6-spoke, 3.8" (96.5mm) diameter, 2.7" (70mm) wide with 17mm hub size.
• ProGraphix wide-track body — trimmed, decaled and painted for ready-to-run appearance.
• Front and rear bumpers — molded plastic for impact protection during hard landings.
• Variable progressive suspension — two-rocker design where travel is not limited by shock length; ride height, travel and progressive rate are adjustable independently.
• Service-friendly pivot system — rubber-sealed pivot balls adjustable with the included tool without removing seals; steel pivot ball retaining rings for secure joints.
• Adjustable geometry — front caster and camber are both adjustable to tune handling and tire wear.
• Ball-bearing-enhanced steering — high-torque servo drives a heavy-duty servo saver for accurate control and protection under impact.
• Factory warranty — 30-day limited warranty on electronic components; chassis and engine are warranted free from defects at date of purchase.

Technical Specifications

• Overall Length: 20.65" (525mm)
• Overall Width: 16.125" (414mm)
• Overall Height: 10.375" (264mm)
• Weight (no fuel): 9.4 lbs (4264 g)
• Wheelbase: 13.7" (348mm) center-to-center
• Front & Rear Track: 16.125" (409mm)
• Center Ground Clearance: 4" (101mm)
• Gear Ratio 1st Gear: 23.85:1
• Gear Ratio 2nd Gear: 15.22:1
• Tire Size (F/R): 5.75" x 3.5" (146 x 89mm)
• Body Length: 19.4" (494mm)
• Body Width (widest): 7.1" (180mm)
• Body Width (thinnest): 6.2" (159mm)
• Body Height: 5.1" (129mm)

What's Included

• Traxxas Revo 3.3 2.4Ghz truck w/oil-filled shocks
• 3.3 engine
• EZ-Start
• painted body
• tires
• wheels
• foam inserts
• TQi 2.4GHz radio
• wireless module
• two high torque ball bearing servos
• docking base
• RX & EZ-Start batteries
• DC charger
• fuel bottle
• extra glow plug & air filter tool set
• illustrated manual
• decals
• air filter
• engine setup DVD
• long travel rocker and spring set

Why Choose This Truck

The Traxxas Revo Nitro 3.3 is built for drivers who want authentic nitro power in a factory-ready package. Its long aluminum chassis, sealed driveline, and adjustable suspension let you push hard off-road while the app-enabled TQi Link system gives fast setup and useful telemetry. Ideal for experienced hobbyists who want a durable, tunable monster truck that’s ready to run right out of the box.