Kyosho Nissan Mini-Z AWD car Fairlady 240ZG RTR (Maroon)

Kyosho Mini-Z AWD car Fairlady 240ZG RTR delivers small-space drifting with a purpose-built MA-020 AWD chassis, Syncro KT-531P radio and drift tires fitted at the factory. This Readyset is aimed at drivers who want an out-of-the-box drift experience—training mode on the radio makes it friendly for newcomers while adjustable gyro support and trims let experienced drivers tune handling.

Key Features

• MINI-Z AWD Readyset based on the MA-020 chassis for four-wheel drive drift performance.
• Updated circuit board with an optimized steering control program for smoother steering behavior.
• Chassis includes a gyro sensitivity adjustment function to dial in steering correction when a gyro is installed.
• Drift tires fitted as standard so the car is ready to practice controlled slides immediately.
• Readyset requires only batteries to be ready for action—minimal setup gets you driving quickly.
• Includes the 2.4GHz Syncro KT-531P transmitter that needs no frequency band setup.
• Factory-painted body finished to display-model quality for an accurate Fairlady 240ZG look.
• VCS (variable camber suspension) on the front optimizes camber change with suspension stroke for consistent grip during cornering.
• Front coil spring can be replaced easily without tools for quick tuning or repairs.
• Wide range of optional parts are available to customize handling, appearance and performance.
• Note: ICS cannot be used. This model is specially set up for the KT-531P transmitter and is compatible with the optional gyro unit MZW446 (sold separately).
• R/C unit built into the complete chassis for compact packaging and easy installation.
• Painted and marked complete body reproduces the Fairlady 240ZG styling.
• Syncro KT-531P transmitter includes steering and throttle trim, dual-rate steering angle adjustment and an LED flash speed control.
• Mini pylon included for setting up drift practice lines or markers.
• Multiple pinion gears supplied: 15T, 17T, 19T and 21T for gearing options.
• Multiple spur gears supplied: 27T, 29T and 31T to fine-tune acceleration and top speed.
• Spare nut included for quick replacements after wheel changes or crashes.
• Wheel wrench and pinion removal tool included for fast maintenance trackside.
• Syncro KT-531P transmitter features a Training Mode that limits speed for easier learning (default at shipment).
• Special aerodynamic 'G nose' Fairlady 240ZG bodywork captures the 1971 race-inspired styling of the model.
• AWD sports chassis is based on the MA-02 platform and features the RA45 unit for balanced handling.
• Strut-type rear suspension complements the VCS front setup for controlled rear behavior during slides.
• Full ball-bearing setup includes 14 ball bearings.
• Chassis includes a special mount space and a small gyro adjustment dial for the optional MZW446 gyro unit.

Technical Specifications

• Length: 175.0 mm (6.88 in)
• Width: 72.8 mm (2.86 in)
• Height: 52.0 mm (2.04 in)
• Weight: 180 g (6.34 oz)
• Wheelbase: 90.0 mm (3.54 in)
• Front/Rear Tread: F: 56.5 mm, R: 56.5 mm
• Front Wheel Offset: Narrow ±0.0 mm
• Rear Wheel Offset: Narrow ±0.0 mm
• Chassis: MA-020-N (MA-020 based AWD sports chassis)
• R/C System: Syncro KT-531P (transmitter and receiver included)
• Drive Type: Forward / Brake / Reverse
• Drivetrain: AWD
• Differential: Gear diffs
• Motor Type: Brushed
• Power Type: Electric
• Shock Type: Coil-over shocks
• Suspension: Independent suspension with VCS front and strut rear
• Scale: 1/28 (Mini size)
• Ball Bearings: Full ball bearings (14 total)
• Radio/Receiver: Included (Syncro KT-531P)
• Servos: Included
• Completion Level: Ready-to-Run (factory assembled)
• Front Track / Rear Track: 2.22" (56.5 mm)
• Wheelbase: 3.54" (90 mm)
• Manufacturer #: 32637MR
• Vehicle Type: Drift car, Mini vehicle size
• Battery / Charger: Battery and charger sold separately (see required items below)
• Approximate Assembly Time: Fully assembled

What's Included

• (1) 1/28 Fairlady 240ZG Mini-Z AWD RTR
• (1) Syncro KT-531P Transmitter
• R/C unit built-in complete chassis
• Painted and marked complete body
• Mini pylon
• (4) Pinion Gears: 15T, 17T, 19T, 21T
• (3) Spur Gears: 27T, 29T, 31T
• Spare nut
• Wheel wrench
• Pinion removal tool
• (4) AAA-size alkaline batteries for transmitter
• (4) AAA-size alkaline batteries for chassis

Required for Operation

• AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for the chassis.
• AAA-size alkaline batteries x 4 for the transmitter.

Why Choose This Model

The Kyosho Mini-Z AWD car Fairlady 240ZG RTR is ideal for anyone who wants authentic scale looks plus immediate drift capability in a pocket-sized package. Training Mode and trim options make it approachable for beginners, while the MA-020 AWD chassis, VCS front suspension and gyro adjustment give experienced drivers room to tune handling for tighter slides. The Readyset format means minimal setup—install batteries and start practicing right away.