Traxxas #5

Brand: Traxxas
Model number: TRA1935
These Traxxas 36 mm Turnbuckles are threaded links whose length you adjust by turning them. They come as a pair with aluminum spacers. Fits the Drag Slash, Nitro Slash and Slash VXL as a replacement part, and the Bandit as an accessory part.
$3.99
Brand: Traxxas
Model number: TRA1937
Traxxas 54 mm Turnbuckles replace non-adjustable camber links with metal turnbuckles, so you can adjust camber on Traxxas trucks. The set includes 2 threaded turnbuckles and 2 aluminum spacers. Requires 2742 rod ends/ball connectors, which are not included.
$2.99
Brand: Traxxas
Model number: TRA1942
The Traxxas Long/Short Rod End Set holds replacement rod ends for your RC car. It has 16 long ends (19 mm), 4 short ends (17 mm), 18 hollow ball connectors and 2 ball screws. The set does not fit the Sledgehammer, original Hawk, Cat, or Bullet.
$7.99
Brand: Traxxas
Model number: TRA1951
Traxxas Long Half Shafts carry drive to the wheels of your RC car. The set includes two white nylon telescoping drive shafts and four crosses made of aluminum.
$6.99
Brand: Traxxas
Model number: TRA1951R
Traxxas Steel Rear CV Driveshafts pass drive on to the wheels. Steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot.
$69.99
Brand: Traxxas
Model number: TRA1952
Traxxas Rear Stub Axle Carriers are the standard version of this part and hold the axle the wheel turns on. You get two carriers, molded of black nylon.
$4.99
Brand: Traxxas
Model number: TRA1952X
Traxxas Blue Aluminum Axle Carriers (L&R) are optional stub axle carriers. A stub axle carrier holds the wheel axle and ties the wheel into the suspension. They fit the Rustler 4X4 VXL Ultimate, Slash 4X4 VXL Ultimate, Nitro Slash and Stampede 4x4.
$27.99
Brand: Traxxas
Model number: TRA1953
The Traxxas Half Shaft Pro Pack holds six sets of telescoping half shafts, which carry drive to the wheels. Each set has an internal shaft that slides in an external-splined shaft. They are white plastic and for use on Traxxas trucks.
$10.99
Brand: Traxxas
Model number: TRA1985
Traxxas PTFE-Coated Washers come as a set of 20 black plastic replacement washers for use with bearings. They are used on the axles and in the transmission. Each measures 5x8 mm and is 0.5 mm thick.
$4.99
Brand: Traxxas
Model number: TRA1993
The Traxxas Slipper Clutch Shaft is a replacement parts set for the slipper clutch in your RC car. It fits the Traxxas Rad 2, TRX-1, Hawk 2, TRX-T Eagle, Blue Eagle, and Blue Eagle LSII. The set comes with a slipper shaft with the roll pin installed, a slipper spring and a nylon-insert aluminum locknut.
$3.00
Brand: Traxxas
Model number: TRA1994
The Traxxas Slipper Clutch Tension Spring fits the Nitro Slash and keeps tension on the slipper clutch. It is the replacement set for Traxxas kits that have slipper clutches. A white spur gear bushing and a 4mm locknut with nylon insert come with it.
$2.99
Brand: Traxxas
Model number: TRA1996
The Traxxas 30-Tooth Idler Gear is the black nylon middle gear in the gearbox. It replaces the gear in the Traxxas Hawk 2, Blue Eagle LS and Blue Eagle LSII. The two 5x11 bearings installed in the gear are not included.
$3.00
Filter by
Categories
Price
$ $
Configuration
Type
Fuel Type
Cars
more... less
Use
Filter

Your cart

There are no more items in your cart

This website use cookies to ensure you get the best experience on our website.Privacy Policy

Sign in