Traxxas Funco Pro Scale Replica RTR Brushless (Red)

The Traxxas Funco Pro Scale Replica is a ready-to-run, full-size X-Series high-speed truck that delivers authentic Funco Pro styling and real-world performance. Designed for experienced drivers, it combines a clipless scale body with a full-length tube frame support, VXL-8s waterproof ESC, and a Velineon 1200XL brushless motor to reach 55+ mph using two 4-cell LiPo batteries and the included speed gearing.

Key Features

• Funco Pro clipless body — scale-correct shell with full-length tube frame support for authentic look and structural backing
• Detailed interior — cockpit includes driver figures for a finished appearance
• Replica engine — scale engine bay fitted with licensed accessories for realism
• 10" color-matched whip lights — body-matched lighting for striking presence; mounted on spring-loaded Flex Tech mounts that protect the body during rollovers
• High-performance rear wing — adds downforce and the correct silhouette for the Funco Pro
• Wheelie bar — helps control wheelstands at full throttle
• VXL-8s waterproof ESC — aggressive tuning for more power across the RPM range, integrated cooling fan, machined heat sink, 10-gauge silicone power wire, LED status lights and built-in protection circuits; provides real-time telemetry through Traxxas Link
• Velineon 1200XL brushless motor — "Big Block" four-pole 1275 Kv motor with a 5 mm output shaft, oversize aluminum heatsink and dual cooling fans for sustained high-speed runs
• 55+ mph top speed — capable with two 4-cell LiPo batteries and the factory speed gearing
• Traxxas Stability Management (TSM) — improves straight-line acceleration and braking on low-traction surfaces without dulling throttle; adjustable from off to full assist via the transmitter
• TQi 2.4 GHz radio system — high-output 2-channel transmitter with a programmable multi-function knob, plus a 5-channel micro receiver (6533) with fail-safe and telemetry ports in a patented waterproof receiver box with easy-access plug; stores settings for up to 30 Traxxas Link-enabled models
• Ultra-heavy-duty 8S driveline — steel CV driveshafts and axles, larger X-Series differential output yokes, and fully machined aluminum stub axles
• Direct-drive transmission — wide-face 1.5 module steel gears, 1.0 module steel pinion and spur gears, and a fixed gear mesh system for predictable power transfer
• Rear differential — huge 1.5 module straight-cut ring gear in a sealed four-gear limited-slip layout, splined outdrives secured with external thru-bolts, and reinforced bulkheads and covers for added bearing support
• Rock-solid motor mounting — preset gear mesh adjustments, four keyed pins to lock the motor, and motor retention independent from gear mesh
• GT Maxx shocks — machined aluminum threaded shock bodies with an extra-large bore, height-adjustable spring retainers, heavy composite shock caps with pivot balls, and bolted lower spring perches
• Suspension — polished aluminum-finish suspension arms molded from cold-weather HD composite, performance-optimized geometry, double-shear connections, high-strength steel suspension pins with retainers, 4 mm machined pivot balls, fixed high-strength camber and toe links, heavy steering blocks and axle carriers, and oversized wheel bearings
• Braking system — electronic rear brake and powerful front dual-vented disc brakes with spring-loaded calipers; front brakes are actuated by the 2075 digital servo, use sheathed brake cables, and stainless steel slotted and drilled rotors
• Low-CG chassis design — modular reinforced nylon tub chassis with interlocking bulkheads, flat bottom, interlocking skid plates, and added buttressing on shock towers for improved handling
• Dual snap-lock battery compartments — secure battery mounting that protects cells from side impacts and accepts secondary clip security
• Clean wiring and tight tolerances — interlocking components for precise fit and built-in wire management for a tidy install
• Wheels and tires — 7.5" rear paddle tires with aggressive paddle design and belted carcass to resist ballooning; 6.8" front arrow-pattern tires for traction on sand, dirt, and pavement; replica Funco beadlock wheel design with color-matched beadlock rings and axle nuts, high-strength glue/bead construction, and large 24 mm splined wheel hubs
• Steering package — powerful 450 oz-in metal-gear steering servo (2085XL), heavy cam-style servo saver, dirt evacuation channels, and full waterproofing
• Sealed ball bearings — reduce friction throughout the drivetrain and suspension
• Hex hardware — fasteners finished with rust-resistant black oxide coating

Technical Specifications

• Model Name: Funco Pro Scale Replica
• Primary Speed: 55+ mph with dual 4-cell LiPo batteries and included speed gearing
• Scale: X-Series
• Overall Length: 32 inches (812 mm)
• Overall Width: 21.7 inches (551 mm)
• Ground Clearance: 1.98 inches (50 mm)
• Weight: 22.06 pounds (10 kg)
• Height: 11.1 inches (283 mm) body; 19.6 inches (498 mm) with whip lights
• Wheelbase: 21.4 inches (543 mm)
• Shock Length: 5.08 inches (129 mm) front; 7.13 inches (181 mm) rear
• Front Tires (Arrow Pattern): 6.8" x 2.3" (173 mm x 58 mm)
• Rear Tires (Paddle): 7.5" x 4.0" (191 mm x 102 mm)
• Front Wheel Dimensions: 3.2" (82 mm inner) x 4.9" (125 mm outer)
• Rear Wheel Dimensions: 3.6" (91 mm inner) x 4.7" (120 mm outer)
• Speed Control: Velineon VXL-8s (brushless)
• Motor: Velineon 1200XL brushless
• Overall Drive Ratio: 16.4:1 (21/50 motor pinion and spur gear)
• Differential Type: Sealed, four-gear, limited-slip
• Gear Pitch: Module 1.5 (transmission), Module 1.0 (pinion & spur)
• Chassis Structure/Material: Reinforced Nylon Tub
• Brake Type: Electronic (rear) and dual vented discs (front)
• Driveline: Direct-drive, RWD
• Steering: Bellcrank
• Radio System: TQi 2.4 GHz transmitter with TSM receiver
• Steering Servo: 2085XL metal gear (450 oz-in.)
• Skill Level: 5
• Battery Tray Dimensions: 186 mm x 51 mm x 44 mm
• Required Batteries: 4 "AA" for the transmitter and two 4-cell LiPo batteries
• Motor Specs (Velineon 1200XL):
  • Type: 1275 Kv sensorless brushless (4-pole)
  • Weight: 23.44 ounces (665 g)
  • Length: 4.32 inches (110 mm)
  • Diameter: 1.88 inches (48 mm)
  • Shaft Size: 5 mm
  • Connector Type: 6.5 mm bullet connectors
• ESC Specs (Velineon VXL-8s):
  • Type: Brushless
  • Case Size: 2.23 in (58 mm) x 2.83 in (72 mm) x 1.81 in (46 mm)
  • Weight: 7.60 ounces (215.5 g)
  • Motor Connectors: 6.5 mm bullet connectors
  • Battery Connectors: Traxxas High-Current Connectors
  • Power Wire: 10 gauge Maxx cable

Why Choose the Funco Pro Scale Replica

This truck is made for high-speed sand and desert-style runs where scale looks matter as much as performance. If you want a full-size X-Series machine with factory speed and scale detail—plus a waterproof electronics package and serious drivetrain components—the Traxxas Funco Pro Scale Replica delivers straight out of the box. Ideal for skilled hobbyists who plan to run on open terrain and demand reliable, maintainable power.