Traxxas 1/10 Nitro Slayer Pro 4X4 TSM 4WD RTR

This is the glow powered, 2.4GHz radio controlled,Traxxas Slayer Pro 4WD Short Course Race Truck
with Traxxas Stability Management.
**The included TQi 2.4GHz radio system is compatible only with the**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES

• Traxxas Stability Management (TSM): Superior tuning algorithms run onhigh-speed electronic components to control wheel spin and steeringdirection on loose dirt, concrete and even ice and snow. TSM can be
• fine tuned or turned off by adjusting the multi-function knob onthe TQi transmitter or the slider in the Traxxas Link app
• Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3Dsemi-monocoque with integrated roll hoop and carry handle
• Drive: Four wheel
• Drive Type: Shaft driven, shafts are .71" (18mm) diameter withhalf shafts and rubber shielded stub axle bearings
• Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valvecarburetor and high flow dual stage air filter with 60% more peakhorsepower than the TRX 2.5 engine, EZ-Start electric starter and7.2V battery
• Exhaust: Polished resonator dual chamber aluminum tuned pipe
• Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
• Radio: Traxxas TQi 2.4GHz high output with digital ball bearingsteering servo, may be equipped with the Traxxas Link WirelessModule (not included, order TRAC6511) that turns an Android,iPad, iPhone or iPod Touch (sold separately) into a powerful tuningtool
• Clutch: Two shoe composite construction
• Transmission: Auto shifting wide ratio two speed, forward only
• Ball Bearings: Full set included, rubber sealed bearings used in allexposed locations
• Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled hard anodized bodies with TiN shafts
• Main Gear: 38 tooth, molded plastic
• Gearbox: Sealed front and rear
• Bumpers: Flexible molded front and rear tube style
• Suspension: Linkage based for long travel and precise tuning adjustments and control
• Differentials: Maintenance free, sealed with silicone X-rings and gaskets, limited slip action can be tuned using different viscosity oil
• Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented steel rotor and semi-metallic friction material
• Tires: BF Goodrich Multi terrain, soft compound rubber
• 1.6" (42mm) wide, 4.3" (109mm) diameter with foam inserts
• Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm) outer diameter, 3" (76mm) inner diameter, 1.6" (41mm) wide
• Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
• Bumpers: Front and rear, plastic construction
• Suspension: Variable progressive two rocker design, suspension travel not limited to length of shocks, ride height, suspension travel and progressive rate can be adjusted totally independent of each other, rubber sealed pivot balls can be adjusted with included tool without removing seals, steel pivot ball retaining rings
• Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle
• Steering: Ball bearing enhanced with twin high-torque servos driving a heavy-duty servo saver
• Warranty: 30 day warranty on electronic components
• Chassis and engine are warranted free from defects at the date of purchase before use. No warranties are expressed or implied that cover damage caused by normal use or wear, or cover or imply how long any chassis or engine part will last before requiring replacement due to wear.

INCLUDES

• Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ- Start, painted body, tires, wheels, inserts, TQi 2.4GHz radio w/ digital ball bearing steering servo, one standard servo, 15T clutch bell, 38T spur gear, tool set, illustrated manual, decals, two air filter elements, filter oil, engine setup DVD, long travel rocker and spring set, TSM, 7.2V battery, 2A DC charger, extra glow plug and fuel bottle

SPECIFICATIONS

• Vehicle-
• Length: 23.54" (598mm)
• Width: 11.65" (296mm)
• Height: 7.87" (200mm)
• Weight: 7.78lb (3.53kg)
• Wheelbase: 13.9" (353mm)
• Front and Rear Track: 12.68" (322mm) outer edges of tires
• Center Ground Clearance: 2.5" (63.5mm)
• Gear Ratio (1st Gear): 15.75:1
• Gear Ratio (2nd Gear): 10.05:1
• Body-
• Length: 21.5" (546mm)
• Width: 9.4" (238mm) behind front wheels, narrowest point 11.4 (290mm) at rear wheels, widest point
• Height: 5.5" (139mm)

COMMENTS

The Slayer Pro 2.4GHz is available in the following body colors;

• Black/Red #47, TRAD39LR Silver/Black #7, TRAD39SL
• Red/Black #25, TRAD39RL Silver #10, TRAD39SS

All original bearings used in the Slayer Pro are rubber shielded. The following list includes the rubber shielded bearings and the non-shielded DuraTrax brand as an economical alternative.
For Replacement Ball Bearings use: DuraTrax Traxxas Qty. Size Location Qty Bearing Set Qty Bearing Set

• 2 12x18mm Front Wheels (1) DTXC1597 (1) TRAC5120
• 2 6x12mm Front Wheels (1) DTXC1569 (1) TRAC5117
• 2 12x18mm Rear Wheels (1) DTXC1597 (1) TRAC5120
• 2 6x12mm Rear Wheels (1) DTXC1569 (1) TRAC5117
• 4 5x11mm Front Bulkhead (2) DTXC1547 (2) TRAC5115
• 4 5x11mm Rear Bulkhead (2) DTXC1547 (2) TRAC5115
• 2 5x11mm Rocker Arm (1) DTXC1547 (1) TRAC5115
• 1 5x11mm Steering Arm (1) DTXC1547 (1) TRAC5115
• 1 5x8mm Steering Arm (1) DTXC1547 (1) TRAC5114
• 1 10x15mm Rear Diff (1) DTXC1595 (1) TRAC5119
• 2 6x12mm Rear Diff (1) DTXC1569 (1) TRAC5117
• 1 8x16mm Rear Diff (1) DTXC1585 (1) TRAC5118
• 2 5x11mm Front Gearbox (1) DTXC1547 (1) TRAC5115
• 2 5x11mm Rear Gearbox (1) DTXC1547 (1) TRAC5115
• 2 5x11mm Primary Shaft (1) DTXC1547 (1) TRAC5115
• 1 10x15mm Primary Shaft (1) DTXC1595 (1) TRAC5119
• 1 6x12mm Primary Shaft (1) DTXC1569 (1) TRAC5117
• 1 5x11mm Spur Gear/Pressure Plate (1) DTXC1547 (1) TRAC5115
• 2 6x12mm Output Shaft (1) DTXC1569 (1) TRAC5117
• 2 5x11mm Clutch Bell (1) DTXC1547 (1) TRAC4611