1/8th Mamba Monster 2+2200View larger

Castle Creations 1/8 Mamba Monster 2/Neu-Castle 2200kV


Castle Creations

This product is no longer in stock

Your price: $309.99


This is the Mamba Monster 2 25V Electronic Speed Control and the Neu Castle 1515 1Y 2200kV Motor, from Castle Creations.


Neu Castle 2200kV Brushless Motor;

  • Ideal for 1/8 scale monster trucks using 6S LiPO batteries
  • High quality oversized ABEC-1 front and rear ball bearings
  • Sintered Neodymium magnets
  • 6.5mm gold connectors with 10 gauge wires (OK to shorten)

Mamba Monster 2 25V ESC;

  • Compatible with on-road, buggies, truggies and monster trucks running up to 6S LiPo batteries and weighing up to 15lbs (6.8kg)
  • Waterproof design allows running in nearly any environment (see COMMENTS below)
  • Profiles can be custom designed on a PC with the Castle Link
  • PC programming software (software not included, can be downloaded for free from Castle's website, voucher is included for free Castle Link Programmer)
  • Solder posts allow battery wire length and direction to be easily changed
  • One year limited warranty through Castle Creations beginning at date of purchase. Warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage or overloading


  • Mamba Monster 2 25V ESC with Cooling Fan
  • On/Off Switch, Fan Plug
  • Motor Wires, Receiver Wire with Connector and Instructions
  • 2200KV Neu Castle Brushless Motor with 10 Gauge Leads
  • Connectors
  • Instructions
  • Voucher for free Castle Link Programmer



  • Input Voltage: 2S-6S LiPo
  • BEC: User selectable output between 5 and 7 volts
  • Brake: Proportional
  • Reversible: Yes, with lockout
  • Dimensions: 1.86 x 2.19 x 1.33" (47 x 56 x 34mm)
  • Weight: 3.93oz (111.5g) without battery connector

Motor, CSEC0400

  • Max Input Volts: 25.2
  • Amp Rating: 120
  • Weight: 15oz (424g)
  • Motor Diameter: 1.57" (39.98mm)
  • 1.64" (41.78mm) with fins
  • Motor Length: 2.9" (75.18mm)
  • Shaft Diameter: 0.197" (5mm)
  • Ball Bearings: Oversize ABEC-1 front and rear
  • Connector: 6.5mm gold


Not intended for use while submerged in liquid. Fan on ESC is not water resistant. Remove fan from ESC before exposing vehicle to liquids.

No customer reviews for the moment.