Traxxas Driveshaft Rebuild Kit (2 Driveshafts)

Traxxas Driveshaft Rebuild Kit supplies the replacement hardware needed to rebuild two complete driveshaft assemblies. This kit is built for hobbyists who want a straightforward repair solution—everything is organized to swap worn U-joints and fasteners quickly and get your rig back on the trail.

Key Features

• U-joints sized for Traxxas driveshafts to restore smooth universal-joint movement and reduce binding.
• Four driveshaft carriers (4) that act as direct replacements for two full driveshafts, keeping alignment correct.
• Four 4.5mm cross pins to secure the U-joints under rotation and impact stresses.
• Four 3mm headed pins that lock components together for dependable alignment during aggressive driving.
• Two 4x15mm screw pins to fasten shaft sections for steady power transfer.
• Two hex pins providing a positive engagement where a snug fit is required.
• Ten e-clips to retain pins and prevent axial movement when cornering or landing hard.
• Eight 3x6x0.5 MW washers to act as thin shims for correct spacing and preload.

Technical Specifications

• Kit contents cover parts for two complete driveshaft assemblies
• Driveshaft carriers: 4
• 4.5mm cross pins: 4
• 3mm headed pins: 4
• 4x15mm screw pins: 2
• Hex pins: 2
• E-clips: 10
• 3x6x0.5 MW washers: 8

What's Included

• U-joints (quantity as required for two driveshafts)
• 4 driveshaft carriers
• 4 × 4.5mm cross pins
• 4 × 3mm headed pins
• 2 × 4x15mm screw pins
• 2 hex pins
• 10 e-clips
• 8 × 3x6x0.5 MW washers

Why Choose This Kit

This Traxxas Driveshaft Rebuild Kit gives you all the retaining hardware and joints needed to return two driveshafts to serviceable condition. It’s a practical, time-saving option for anyone maintaining a Traxxas drivetrain or fixing damage after a heavy bash—keeps parts consistent and minimizes teardown time.