⚠️ BATTERY AND CHARGER NOT INCLUDED
Product Details
⚠️ BATTERY AND CHARGER NOT INCLUDED
- Hobby knife
- Glue
- Paint and finishing tools
More info
The Traxxas TRX-4 Crawler Ford F-150 High Trail Edition is a ready-to-run 1/10 scale trail machine that brings authentic Ford F-150 details to serious trail driving. It pairs portal axles and a factory long-arm lift for extra ground clearance with waterproof electronics and a TQi radio for confident control on tough terrain.
Key Features
- Official Ford F-150 body — Licensed 1979 Ford F-150 Ranger XLT body with scale grille, chrome bumpers, mirrors, door handles and wipers for an accurate vintage look.
- Scale detail extras — LED-ready headlight, tail light and roll bar locations plus an authentic decal sheet and full nylon composite wheel wells and floor pans.
- Clipless body mounting — Smooth, pin-free exterior look with a rugged internal body cage; body details mount directly to the internal frame for secure fitment.
- Trail-tuned XL-5 HV speed control — Fully waterproof ESC with large heatsink, Traxxas EZ-Set one-button setup, two-stage low-voltage protection and wide battery compatibility.
- Five drive profiles — Sport, Race (no reverse), Training (patented reduced power), Trail (drag-brake neutral) and Crawl (instant reverse with hill-hold) let you match driving feel to conditions and skill.
- Titan 550 motor — 21T reverse-rotation brushed motor with internal cooling fan and factory preset gear mesh; motor retention is independent of gear mesh for easier service.
- Portal axles — Raise center ground clearance, reduce torque twist, use steel gearing and improve axle geometry to ease drivetrain stress on steep lines.
- Strong driveline — Full-time shaft-driven 4WD with 6 mm stub axles, steel front CV driveshafts, hardened rear axle shafts, remote locking cable-actuated steel gear diffs and a steel gear transfer case.
- Factory-installed long arm lift kit — More than 1" of added ground clearance while keeping precise steering geometry and accommodating oversize 2.2" wheels and tires.
- TQi 2.4 GHz radio system — 4-channel transmitter with 6533 micro receiver, fail-safe, telemetry ports and Cruise Control for extended trail driving; compatible with Traxxas Link module for app features.
- Extended wheelbase chassis — Long 336 mm (13.23") wheelbase on full-length 1.5 mm thick steel frame rails with adjustable bumpers, rock rails and integrated wire-routing clips for tidy installs.
- Innovative battery compartment — Hinged strap design for quick battery access with no loose pins; accepts full-size long packs and can adapt to smaller 1/16 scale packs with optional straps and a secondary front tray.
- Two-speed transmission — Remote-shifting high/low range with dual horizontal shafts and a twin friction-plate slipper clutch that is easy to remove for service.
- High-torque steering — Chassis-mounted 2075X metal-gear digital servo delivers up to 45° steering angle with direct steering and geometry corrected to minimize bump steer.
- Purpose-built suspension — Front 3-link with Panhard bar and rear triangulated 4-link using 5 mm steel link rods, heavy rod ends with steel hollow balls and 4 mm threaded ends for solid articulation.
- Extended aluminum GTS shocks — Extra-long oil-filled coilover bodies exclusive to TRX-4 for greater articulation, silver-anodized aluminum construction, threaded collars to adjust ride height and reliable sealing with O-ring and dual X-ring shaft seals.
- Oversize wheels and tires — 2.2" slotted mag-style wheels with hub inserts paired with pre-mounted 2.2" Canyon Trail tires on trail-tuned foam inserts and S1 rubber compound; 12 mm steel hex hubs provide positive wheel retention.
- Sealed bearings & hardware — Sealed ball bearings throughout and hex hardware finished with a rust-resistant black oxide coating for long-term reliability on wet trails.
- Requires battery and charger — No battery or charger included; the package is set up to accept full-size long packs or smaller packs with optional straps.
Technical Specifications
- Model: TRX-4 Ford F-150 High Trail Edition
- Type: Trail / Crawler
- Skill Level: 1 (beginner-friendly)
- Scale: 1/10
- Chassis: Extended steel ladder frame, full-length 1.5 mm thick frame rails
- Weight: 7.34 lb (3.33 kg)
- Length: 22.30 in (566 mm)
- Width / Front Track / Rear Track: 10.60 in (270 mm)
- Height: 10.82 in (275 mm)
- Wheelbase: 13.23 in (336 mm)
- Center Ground Clearance: 4.00 in (99 mm)
- Driveline: Shaft-driven 4WD with steel gear transfer case
- Transmission: 2-speed high/low with remote shifting
- Differential Type: 4-gear, remote locking (cable-actuated)
- Gear Pitch: 32 pitch
- Steering Servo: 2075X metal-gear digital high-torque, waterproof
- Radio System: TQi 2.4 GHz 4-channel transmitter with 6533 5-channel micro receiver (telemetry ports, fail-safe)
- Battery Compartment: 159 x 47 x 23 mm (plus 26 mm clearance spec)
- Motor: Titan 550 21T reverse rotation, high-torque brushed motor; weight 390 g (13.76 oz); overall length 78 mm, can length 57 mm; diameter 39 mm; 3 mm shaft; bullet connector
- ESC: XL-5 HV brushed ESC; case size 31 x 55 x 26 mm; weight 74 g (2.6 oz); bullet motor connectors; Traxxas high-current battery connector; 14 gauge power wire
- Wheels / Tires: 2.2" slotted mag wheels with hub inserts, pre-mounted Canyon Trail 2.2" tires with foam inserts and S1 compound; 12 mm steel hex
- Hardware & Bearings: Sealed ball bearings and hex hardware with rust-resistant black oxide coating
Why Choose This Crawler
This TRX-4 Ford F-150 High Trail Edition combines authentic Ford styling with the mechanical features serious trail drivers want: portal axles and a long-arm lift for extra clearance, a two-speed transmission for varied terrain, and a waterproof speed control for wet or muddy runs. It's ideal for beginners who want a complete RTR trail rig and for experienced drivers looking for a built, trail-capable truck ready to tackle technical lines.
Note: Requires separate battery and charger to operate.
About the Brand

Customer reviews
No customer reviews for the moment.