Product Details
- Hobby knife
- Glue
- Paint and finishing tools
More info
The Traxxas TRX-4M Ford F-150 High Trail Edition is a 1/18 scale trail crawler built on the TRX-4M platform. Skill level 1 suits beginners.
Body
The truck wears an officially licensed 1979 Ford F-150 body with a clipless design. The highly detailed ABS hard body has molded-in color that won't chip or flake. The body also has tough fender flares and rock sliders. Realistic side mirrors, door handles, roll bar, and wipers add detail. LED headlights complete the front.
Heavy-duty latching clips secure the body. They hold tightly on the trail and release in just seconds.
Electronics and radio
The truck is equipped with the ECM 2.5 Electronic Control Module, a brushed type. The module incorporates the ESC, receiver, and LED controller in one chassis. Its case measures 1.79 inches (45 mm) x 1.26 inches (32 mm) x 0.6 inches (15 mm). It weighs 0.92 ounces (26 g) and is fully waterproof for all-weather fun.
The module offers three drive profiles:
- Sport Mode: forward / brake / reverse
- Trail Mode: forward / brake / reverse / with trail-tuned drag brake in neutral
- Crawl Mode: forward / instant reverse, no neutral, with 100% hill holding brake
The module has Traxxas EZ-Set one-button setup and built-in Pro Scale LED functionality. Two stage low voltage protection (LVD) and motor overload protection are built in as well.
The radio system is a full-size TQ 2.4 GHz 2-channel transmitter. The transmitter offers all-day comfort with precise long-range control.
Motor and drivetrain
A Titan 180 87-turn brushed electric motor powers the truck. The motor weighs 1.16 ounces (33 g) and is 1.66 inches (42 mm) long. Its diameter is 0.81 inches (21 mm). Fixed gear mesh doesn't require adjustment. The motor has a forward mounting position for improved crawling dynamics.
The driveline is full-time shaft-driven 4-wheel drive. The transmission is a single speed direct drive. The solid steel front and rear axles have a locked spool differential. The center driveshafts are heavy-duty CV driveshafts. The internal gear ratio is 11.38, with 64 pitch gearing.
Optional Low Range or Speed Gearing transmission ratios are sold separately. The modular transmission design swaps out in minutes.
Chassis and steering
The frame is an extended heavy-duty steel ladder frame with a deep C-channel design. A thicker center section gives maximum rigidity. The rails run from bumper to bumper. The low-CG battery tray concentrates weight lower for improved stability. A wide rubber strap secures the battery in place. The battery compartment measures 51 mm x 31 mm.
The steering servo is a heavy-duty 2065T with a metal main gear. Steering angle is a superior 45°. The steering is direct, with no servo saver.
Suspension, wheels and tires
The truck has Lifted High Trail Suspension with revised shock towers. A triangulated 4 link runs front and rear. The suspension also has heavy-duty rod ends.
Oil-Filled GTM shocks provide smooth controlled damping. They give realistic driving body movements. The shocks have adjustable pre-load spacers, and available rebuild kits make them easy to refresh.
The wheels are 1-inch replica slotted chrome mag wheels with a 7 mm hex. Mickey Thompson Baja Pro XS tires are pre-mounted. The tires use a trail-tuned rubber compound. The truck also has low-maintenance self-lubricating bushings and durable Hex hardware.
Size and weight
- Weight: 1.03 lbs (468 g)
- Length: 10.6 inches (269 mm)
- Width: 5.0 inches (127 mm)
- Front track: 5.0 inches (127 mm)
- Rear track: 5.0 inches (127 mm)
- Height: 5.0 inches (127 mm)
- Wheelbase: 6.38 inches (162 mm)
- Center ground clearance: 1.57 inches (40 mm)
What's in the box
The box includes a battery and a charger. The battery is a high-capacity 2-cell LiPo with iD, rated 7.4 volts. Its 750 mAh rating is good for over an hour of run time. The charger is a 2-amp USB-powered charger. iD technology gives faster, safer charging.
About the Brand

Customer reviews
No customer reviews for the moment.