Model number: RPM73622
Product Details
Needed to Complete (not included):
- Hobby knife
- Glue
- Paint and finishing tools
NOTE: Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly.
More info
The RPM ESC Cage is designed to simplify ESC installation and maintenance of the E-Maxx, E-Revo and Summit, as well as adding versatility by allowing quick removal of the ESC. Our cage encases the ESC body only, leaving the ESC fan free to do its job. Furthermore, we left air channels along both sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool.
With the stock Traxxas ESC, there's no solid mount available when you need to remove the ESC fan, like when you're running in the wet or in the snow. That's not a problem with the RPM ESC Cage. Simply remove two screws, unhook the fan, reinstall those two screws and you're off; with the solid assurance RPM's Cage is still holding tight to that valuable Castle ESC.
We include a separate on / off switch mount that bolts directly to our cage in one of two locations for extra versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles.
Our ESC Cage fits the Castle Mamba Monster X & Mamba Monster 2 ESCs, as well as the Traxxas MXL-6S ESC and fits in the stock location on the Traxxas E-Maxx, E-Revo and Summit.
Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance. Each cage is molded in black and backed by our limited lifetime warranty against breakage.
Key Features
- Works with the Traxxas MXL-6S ESC
- Works with the Castle Mamba Monster 2 & Mamba Monster X
- Fits the Traxxas E-Maxx, E-Revo & Summit
About the Brand
Customer reviews
Slash 4x4 Needs Adjustments
Honestly, not sure where it's supposed to mount but on my Slash 4x4 I found only one spot where holes matched up. If you go with those, you can either add spacers so the bottom plate sits above the center driveshaft channel, or you can do what I did: notch out part of the chassis and cover so it sits flush on the chassis floor. Overall, it's a solid product and a great concept! Only change I'd make is having 4 screws holding the top piece on the ESC instead of just 2. Feels a little flimsy, but we'll see how it holds up!
Was this review helpful?
Essential for Yeti XL with Mamba
Got a Mamba Monster X and trying to fit it in a Yeti XL? You really need this part. There's no other way to secure the ESC properly without it. Worked perfectly for me.