Traxxas Funco Pro Scale Replica Sand Car RTR 8S (Green)

The Traxxas Funco Pro Scale Replica Sand Car brings full-size sand performance to RC in a ready-to-run package. It combines Velineon power, VXL-8s waterproof speed control, and an ultra-heavy-duty 8S driveline so you can push 55+ mph on dunes and beaches while keeping control and reliability.

Key Features

• Funco clipless body with full-length tube-frame support for authentic scale looks and chassis protection.
• Detailed interior including driver figures and a replica engine fitted with licensed accessories for true-to-life presentation.
• 10-inch color-matched whip lights that integrate into the body for night or low-light runs.
• Spring-loaded Flex-Tech mounts that help protect the body during rollovers and hard landings.
• High-performance rear wing tuned for stability at speed on loose surfaces.
• Wheelie bar to prevent over-rotation under hard acceleration.
• VXL-8s waterproof electronic speed control tuned aggressively for strong power delivery at any rpm and protected with integrated circuits and LED status lights.
• ESC cooling that includes a machined heat sink and integrated fan to keep temperatures in check during long runs.
• Real-time telemetry via Traxxas Link for monitoring performance and settings on the fly.
• 10-gauge silicone power wire and Traxxas high-current connectors for reliable current delivery to the motor.
• Velineon 1200XL brushless “Big Block” motor — a 4-pole, 1275 Kv unit with a 5 mm output shaft, oversized aluminum heatsink and dual cooling fans for sustained power.
• 55+ mph capability when using two 4-cell LiPo batteries and the included speed gearing for top-end runs.
• Traxxas Stability Management (TSM) that improves straight-line acceleration and braking on low-traction surfaces while not dulling throttle feel; adjustable from off to full via the transmitter.
• TQi 2.4 GHz 2-channel radio system with a programmable multi-function knob and auto-storage for up to 30 Traxxas Link-enabled models.
• 5-channel micro receiver (6533) with fail-safe, telemetry ports and a patented waterproof receiver box with an easy-access plug.
• Ultra-heavy-duty 8S driveline featuring steel CV driveshafts and axles, new larger X-Series differential output yokes, and fully machined aluminum stub axles for long-life durability.
• Direct-drive transmission using 1.5 module wide-face steel gears and 1.0 module pinion and spur gears with a fixed gear mesh system for a strong, efficient drivetrain.
• Rear differential with a huge 1.5 module straight-cut ring gear, sealed 4-gear limited-slip design, splined outdrives secured with external thru-bolts, and reinforced bulkheads for added bearing support.
• Rock-solid motor mounting that uses precise preset gear mesh, four keyed pins to lock the motor, and motor retention separate from gear mesh for easier service and consistent mesh.
• GT Maxx shocks with machined aluminum threaded bodies, extra-large bore and fluid capacity, height-adjustable spring retainers, heavy composite shock caps with pivot balls, and bolted lower spring perches.
• Suspension package with polished aluminum-finish arms molded from cold-weather HD composite, performance-optimized geometry, double-shear connections, high-strength steel pins with retainers, 4 mm machined pivot balls, fixed camber/toe links, heavy steering blocks and axle carriers, and oversized wheel bearings.
• Braking system that combines electronic rear braking with powerful front disc brakes using spring-loaded calipers, operated by the 2075 digital brake servo; includes sheathed brake cables and stainless slotted/drilled rotors.
• Low-center-of-gravity chassis built from a reinforced nylon tub with modular interlocking bulkheads, flat bottom design, interlocking skid plates, and high-strength buttressing on the shock towers for improved handling.
• Dual snap-lock battery compartments that protect batteries from side impacts and allow secondary clip security for safe power mounting.
• Clean wiring and tight tolerances thanks to interlocking components and dedicated wire management for a tidy build and serviceability.
• Wheels and tires optimized for sand: aggressive 7.5-inch rear paddle tires with a belted carcass to resist ballooning, and 6.8-inch front arrow-pattern tires for traction on sand, dirt, and pavement.
• Replica Funco beadlock wheels with color-matched beadlock rings and axle nuts, high-strength glue/bead design, and huge 24 mm splined wheel hubs.
• Steering handled by a powerful 450 oz-in 2085XL metal-gear servo, cam-style servo saver, dirt-evacuation channels, and fully waterproof components for dusty, wet conditions.
• Sealed ball bearings throughout for smooth operation and reduced maintenance.
• Hex hardware finished with a rust-resistant black oxide coating to help prevent corrosion in coastal and wet environments.

Technical Specifications

• Model Name: Funco Pro Scale Replica
• Top Speed: 55+ mph with two 4-cell LiPo batteries and included speed gearing
• Scale: X-Series
• Length: 32 in (812 mm)
• Width: 21.7 in (551 mm)
• Ground Clearance: 1.98 in (50 mm)
• Weight: 22.06 lb (10 kg)
• Body Height: 11.1 in (283 mm)
• Overall Height (with whip lights): 19.6 in (498 mm)
• Wheelbase: 21.4 in (543 mm)
• Shock Length: Front 5.08 in (129 mm), Rear 7.13 in (181 mm)
• Front Tires: Arrow pattern, 6.8 in x 2.3 in (173 x 58 mm)
• Rear Tires: Paddle, 7.5 in x 4.0 in (191 x 102 mm)
• Front Wheels: 3.2 in (82 mm) inner x 4.9 in (125 mm) outer
• Rear Wheels: 3.6 in (91 mm) inner x 4.7 in (120 mm) outer
• Speed Control: Velineon VXL-8s brushless ESC
• Motor: Velineon 1200XL brushless
• Overall Drive Ratio: 16.4:1 (21/50 motor pinion and spur gear)
• Differential Type: Sealed, four-gear, limited-slip
• Gear Pitch: Module 1.5 (transmission), Module 1.0 (pinion & spur)
• Chassis Structure/Material: Reinforced nylon tub
• Brake Type: Electronic (rear), dual vented discs (front)
• Driveline: Direct-drive, RWD
• Steering: Bellcrank
• Radio System: TQi 2.4 GHz transmitter with TSM receiver
• Steering Servo: 2085XL metal gear, 450 oz-in
• Skill Level: 5 (recommended for experienced drivers)
• Battery Tray Size: 186 x 51 x 44 mm
• Required Batteries: 4 AA for the transmitter and two 4-cell LiPo batteries for the vehicle
• Motor Details:
  • Name: Velineon 1200XL
  • Type: 1275 Kv sensorless brushless, 4-pole
  • Weight: 23.44 oz (665 g)
  • Length: 4.32 in (110 mm)
  • Diameter: 1.88 in (48 mm)
  • Shaft Size: 5 mm
  • Connector Type: 6.5 mm bullet connectors
• ESC Details:
  • Name: Velineon VXL-8s
  • Type: Brushless
  • Case Size: 2.23 x 2.83 x 1.81 in (58 x 72 x 46 mm)
  • Weight: 7.60 oz (215.5 g)
  • Motor Connectors: 6.5 mm bullet connectors
  • Battery Connectors: Traxxas high-current connectors
  • Power Wire: 10-gauge Maxx cable

Why Choose This Product

The Traxxas Funco Pro Scale Replica Sand Car is made for high-speed sand running and scale fans who want realistic looks with race-ready hardware. With its heavy-duty 8S driveline, Velineon powertrain, and TQi radio with TSM, it suits experienced drivers who demand speed, control, and serviceable components for serious bashing and beach runs.