Model number: HPI115126
Product Details
Fuel Type: Electric
Needed to Complete (not included):
- Hobby knife
- Glue
- Paint and finishing tools
NOTE: Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly.
More info
This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale, Ready-to-Run RS4 Sport 3 On-Road Car with the Vaughn Gitten Jr. 2015 Mustang Spec 5 Demo Car Body.
FEATURES
- Chassis: Plastic
- Drive: Fully enclosed four wheel shaft
- Radio: HPI TF-11 2.4GHz
- Motor: HPI 15T Firebolt, longitudinally mounted
- Electronic Speed Control: Waterproof SC-3SWP2
- Differentials: Sealed metal gear, capable of handling brushless power
- Body: Ford Mustang Spec 5 trimmed and painted with all sponsor decals applied
- Shocks: Composite body, oil filled
- Suspension: Double wishbone
- Wheels: Neon green composite plastic, width: 1.02" (26mm), diameter 1.9" (48mm)
- Tires: Treaded rubber
- Ball Bearings: Complete set
- Battery: HPI Plazma 7.2V NiMH 2000mAh with standard connector
- Battery Charger: AC powered wall type
- Battery Compartment: Holds standard LiPos and up to 7-cell NiMH batteries, adjustable for extra traction or increased steering, thick hook and loop straps hold battery in place
- Front Bumper: Foam
- Pinion Gear: Steel, 48P 27 tooth
- Spur Gear: Molded plastic, 48P 75 tooth
- Caster: Non-adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
- Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
- Warranty: 2-year limited through manufacturer, valid only in USA, Canada and South America
INCLUDES
- HPI RS4 Sport 3 On-Road Car with 2015 Mustang Body
- Radio
- ESC
- Motor
- Battery
- Charger
- four AA Batteries
- Instructions
- 27T Pinion Gear
- 75T Spur Gear
REQUIREMENTS
- Track and maintenance equipment
SPECIFICATIONS
Vehicle
- Length: 16.9" (430mm)
- Width: 7.4" (190mm)
- Height: 4.9" (125mm)
- Wheelbase: 10" (255mm)
Body
- Length: 17" (432mm)
- Width: 7.7" (198mm) behind front wheels-narrowest point 8.1" (207mm) at rear wheels-widest point
- Height: 4.7" (120mm)
COMMENTS
- For Replacement Ball Bearings use:
- Qty. Size Location Qty. Bearing Set
- 2 5x10mm Drive Shaft 1 DTXC1535
- 2 10x15mm Front Diff 1 DTXC1595
- 2 10x15mm Rear Diff 1 DTXC1595
- 4 5x10mm Front Uprights 2 DTXC1535
- 4 5x10mm Rear Uprights 2 DTXC1535
- 4 5x8mm Steering 2 DTXC1523
- 2 3x8mm Mount Set 1 HPIC2014
About the Brand
Customer reviews
No customer reviews for the moment.
