Tekno RC M6 Driveshafts & Hub Carriers Rear 6 mm Traxxas Slash 4x4, Stampede 4x4

The Tekno RC M6 Driveshafts and Rear Hubs will give your Slash 4×4 or Stampede 4x4 the ultimate in performance and durability. Oversized ball bearings for higher loads and hardened steel driveshafts makes this kit one of the best alternatives to the stock Traxxas plastic driveshafts and a must when you upgrade your truck to Brushless or Lipo power and speeds. Kit also comes with durable Tekno ball bearing career for oversized ball bearings and features 6 extra holes for advanced suspension setup.

FEATURES:

• Custom 6mm stub axles – no more bending or breaking
• Bigger bearings for better load handling 10x15x4 inner and a 6x12x4 outer bearing (stock is 5x11x4 inner/outer)
• Hardened steel driveshafts and drive cups
• Captured CV drive pin – it can’t fall out.
• New M6 rear hub design with multiple camber link locations
• Includes two sets of rear hubs (0.5  and 1.5 degrees).  1, 2, 3, and 4 degree settings available.
• Reduces slop
• Stock wheels and nuts fit with no mods
• Metric hardware throughout
• 17mm adapter option (sold separately)

REQUIRES:

• Screw pin from the original Traxxas output yoke (TRA6828X – M3 Screw Pin)

Note:

In most instances you won't, but just in case you have any issues with anything breaking, this will most likely be caused by running the RPM A-Arms made from pure nylon. These arms are not compatible with our kit as they are too flexible. Because of this extreme flexibility, the metal parts of our kit are compromised during use. For this reason, we can only recommend using the stock Traxxas arms.