Parts #97

The Traxxas Servo Saver protects the steering servo against impacts and replaces a damaged or worn one. It fits 25T spline servo gears, and 23T and 24T spline adapters come with it. A new spring and a mounting screw are included.

Body posts and mounts that hold the body on at both ends, made of black plastic. They fit the 1/10 scale Nitro Slash, Traxxas Slash, Traxxas Rustler and Traxxas Stampede.

The Traxxas 18-Tooth Pinion Gear (48-Pitch) 3 mm Bore is a brass pinion gear that fits 3 mm motor shafts. It lets you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed.

Traxxas Anti-Squat Wedges fit the Nitro Slash and install under the rear suspension arm mounts. They adjust the amount of rear anti-squat. The set has two 1.5-degree wedges and two 3-degree wedges.

These Traxxas 36 mm Turnbuckles are threaded links whose length you adjust by turning them. They come as a pair with aluminum spacers. Fits the Drag Slash, Nitro Slash and Slash VXL as a replacement part, and the Bandit as an accessory part.

Traxxas 54 mm Turnbuckles replace non-adjustable camber links with metal turnbuckles, so you can adjust camber on Traxxas trucks. The set includes 2 threaded turnbuckles and 2 aluminum spacers. Requires 2742 rod ends/ball connectors, which are not included.

The Traxxas Long/Short Rod End Set holds replacement rod ends for your RC car. It has 16 long ends (19 mm), 4 short ends (17 mm), 18 hollow ball connectors and 2 ball screws. The set does not fit the Sledgehammer, original Hawk, Cat, or Bullet.

Traxxas Long Half Shafts carry drive from the differential out to the wheels. The set includes two external shafts, two internal-splined shafts and four metal crosses. Fits the BIGFOOT No. 1 XL-5 w/Battery, Rustler 2WD XL-5 w/Battery, Slash 2WD XL-5 with Battery and Stampede.

Traxxas Steel Rear CV Driveshafts pass drive on to the wheels. Steel constant velocity shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot.

Traxxas Rear Stub Axle Carriers are the standard version of this part and hold the axle the wheel turns on. You get two carriers, molded of black nylon.

Traxxas Blue Aluminum Axle Carriers (L&R) are optional stub axle carriers. A stub axle carrier holds the wheel axle and ties the wheel into the suspension. They fit the Rustler 4X4 VXL Ultimate, Slash 4X4 VXL Ultimate, Nitro Slash and Stampede 4x4.

The Traxxas Half Shaft Pro Pack is a set of telescoping half shafts that carry drive from the differential to the wheels. It includes six internal and six external-splined half shafts in white plastic. The set is for use on Traxxas trucks.