Traxxas 1/10 Slash 4X4 Platinum Brushless ARR

This is the brushless electric powered, radio controlled, almost ready to run 1/10 scale Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck. The differences between this version and the 6804 are a new Low CG Chassis and GTR High Volume Shocks on the 6804R. Requires transmitter, receiver, batteries, charger and paint for the body.

FEATURES

• Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type
• Drive: Four wheels of chassis
• Electronic Speed Control: Traxxas VXL-3S waterproof, with high-current connector, training mode, reverse and low voltage detection for use with 2S and 3S LiPo packs
• Motor: Traxxas Velineon 3500 with ultra high temperature
• Neodymium magnets and high speed ball bearings
• Spur Gear: 45 tooth
• Pinion Gear: 31 tooth 32 pitch, extra pinion gear included for 50+MPH operation with extra battery
• Body: Clear polycarbonate with overspray film and window masksBumpers: Front and rear, composite construction
• Shocks: Hard anodized oil-filled aluminum body GTR with PFTE coated13mm bores and titanium nitride shafts for smooth, consistentdamping
• Suspension: C-hub design, front and rear sway bars
• Transmission: Ball bearing equipped
• Differentials: Sealed silicone filled planetary gear type, centerdiff installs trackside in minutes replacing the Torque Controlslipper
• Ball Bearings: Rubber sealed
• Caster: Non-adjustable
• Camber: Adjustable, camber refers to the angle of the tops of thetires from vertical when viewed from front or behind vehicle
• Tires: Licensed BF Goodrich soft compound Mud Terrain T/A 4.3"(109mm) diameter, 1.7" (43mm) wide
• Wheels: 5-spoke brushed chrome, 0.98" (25mm) wide, 1.4" (35mm)diameter, standard size 12mm hex, aluminum wheel nuts
• Steering: Blue anodized aluminum steering blocks, spring loaded servoprotection, high torque digital ball bearing servo
• INCLUDES
• ARR Traxxas Slash 4x4 Platinum Edition Short-Course Racing Truck withsteering servo, decals, aluminum C-hubs, steering blocks, rear hubcarriers and axle nuts, extra swaybar set, Big Bore shocks, clearbody, Velineon 3500 brushless motor and instruction manual

SPECIFICATIONS

• Vehicle-
• Length: 22.36" (568mm)
• Width: 11.65" (296mm)
• Height: 8.42" (214mm)
• Front and Rear Track: 11.65" (296mm) distance between outer edges of
• wheels side-to-side
• Ground Clearance: 2.5"
• Body-
• Length: 21.25" (540mm)
• Width: 11.5" (292mm)
• Height: 5.5" (140mm)

COMMENTS

• The ball bearings in the Traxxas Slash 4x4 are rubber sealed.
• Following are the stock numbers for the replacement bearings fromTraxxas and non-rubber sealed alternatives from Duratrax;
• Qty. Size Location Qty. Bearing Set
• 2 8x12mm Fr Drivshaft 1 TRAC7020 DTXC1581
• 2 4x8mm Fr Hubs 1 TRAC7019 DTXC1511
• 2 8x12mm Rear Drivshaft 1 TRAC7020 DTXC1581
• 2 4x8mm Rear Hubs 1 TRAC7019 DTXC1511
• 2 4x8mm Fr Diff 1 TRAC7019 DTXC1511
• 2 5x8mm Steering Bellcrank 1 TRAC6728 DTXC1523
• 2 4x7mm Rocker Arm Post 2 DTXC1507
• 4 8x12mm Differentials 2 TRAC7020 DTXC1581
• 4 4x8mm Differentials 2 TRAC7019 DTXC1511
• 6 4x8mm Transmission 3 TRAC7019 DTXC1511
• 2 4x8mm Rear Ring Gear 1 TRAC7019 DTXC1511