Traxxas Nitro Rustler 1/10 RTR Stadium Truck

This is the glow powered, 2.4GHz radio controlled, ready-to-run Traxxas Nitro Rustler 1/10 scale Stadium Race Truck with Traxxas Stability Management.
**The included TQ 2.4GHz radio system is compatible only with the**#6519 receiver and does NOT accept the Docking Base accessory.**

FEATURES

• Traxxas Stability Management (TSM): Superior tuning algorithms run on
• high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
• Chassis: T-6 aluminum anodized blue with fiber composite upper plate/ front brace
• Radio: Traxxas TQ 2.4GHz radio system
• Engine: Traxxas 2.5 racing engine with EZ-Start electric starter,
• slide valve carb, two glow plugs, air filter and cylinder head protector, battery and charger for EZ-Start
• Exhaust: Composite tuned pipe with aluminum header
• Drive: Rear wheel with telescoping U-joint drive shafts
• Body: Pre-painted, pre-cut polycarbonate body
• Shocks: Four composite bodied oil-filled
• Slipper Clutch: Adjustable
• Suspension: 4-wheel independent
• Transmission: Ball bearing equipped, Magnum 281
• Differential: Planetary gear with steel internal gears
• Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb
• Brake: Composite disc type
• Spur Gear: Nylon, 70 tooth 32-pitch
• Wheels: Chrome 2.0" (51mm) wide, 2.8" (71mm) diameter five-split
• spoke Jato
• Tires: Front, ribbed 2.8" (71mm) inner diameter, 2" (51mm) wide
• Rear, Traxxas Alias 2.8" (71mm) inner diameter, 2" (51mm) wide
• Caster: Adjustable, caster/toe-in refers to the angle of the front
• suspension when viewed from the side of the car in relation to the chassis
• Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle suspension when viewed from the side of the car in relation to thei chassis

INCLUDES

• Assembled Nitro Rustler with TRX-2.5 racing engine and glow plug, TSM, EZ-Start electric starter, painted body with rear wing, decals, 2.4GHz radio system, tuned pipe, instruction sheet, extra glow plug, fuel bottle, tools, battery & charger

SPECIFICATIONS

• Length: 17-1/4" (438mm)
• Front Track: 12-1/2" (318mm)
• Rear Track: 12-3/8" (314mm)
• Weight: 60 ounces (1701g) without radio
• Height: 6" (152mm)
• Wheelbase: 11.3" (287mm)
• Fuel Capacity: 2.5 ounces (75cc)
• Engine: TRX 2.5 racing w/EZ Start System
• Gear ratio: Adjustable 8.43:1 to 12.64:1
• Differential: Planetary gear
• Brake: Disc
• Chassis: Double-decker (bottom aluminum,top composite)
• Spur gear: Nylon, 70 tooth 32-pitch
• Clutch bell: 20 steel tooth
• Caster block: Front 30 degrees

COMMENTS

• For Replacement Ball Bearings use:
• Qty. Size Location Qty. Bearing Set
• 4 5x11mm Front Wheels 2 DTXC1547
• 4 5x11mm Rear Wheels 2 DTXC1547
• 6 5x11mm Transmission 3 DTXC1547
• 2 5x11mm Clutch Bell 1 DTXC1547
• Available in the following color schemes,
• Blue, TRAD58BB Silver/Blue, TRAD58SB
• Red, TRAD58RR Silver/Red, TRAD58SR
• REPLACING EZ STARTER WITH STANDARD RECOIL STARTER
• To convert the EZ starting to a standard pull starter, purchase part numbers TRAG5170, TRAP5211 one-way bearing, 4 3x8mm machine screws, take out the three bolts on the EZ-Starter, clip the wires on the EZ-Starter, and install recoil pullstart.