Traxxas 1/10 Bandit VXL TSM TQi RTR

This is the 1/10 Scale, 2.4GHz Radio Controlled, Ready-to-Run Traxxas Bandit VXL Brushless Motor Powered Off-Road Buggy with Traxxas Stability Management.
Equipped with the Velineon Extreme Brushless Power System consisting of;
Exclusive Waterproof Design
Traxxas High Current Connector
Maxx Cable 12 Gauge Wire
Velineon 3500 Brushless Motor
Velineon VXL-3s Fwd/Rev/Brake Electronic Speed Control

FEATURES

• Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app
• Chassis: Fiber composite bathtub style .15" (4mm) thick
• Drive: Rear wheel drive
• Motor: Traxxas Velineon 3500 brushless
• Radio: Traxxas TQi 2.4GHz Direct Sequence Spread Spectrum (DSSS) programmable system with Traxxas Link automatic model recognition that allows up to 20 Traxxas Link receivers and transmitters to be bound, transmitter automatically recalls settings for any previously bound receiver
• Speed Control: Traxxas Velineon VXL-3s Forward/Reverse/Brake
• Battery: 8.4V 7-cell NiMH 3000mAh Traxxas Power Cell
• Battery Charger: 4A DC powered
• Shocks: Ultra Shocks with powder coated White springs
• Gearbox: Sealed
• Differentials: Planetary gear type with hardened steel gears
• Transmission: Three gear variable ratio with sealed ball bearings and telescoping driveshafts
• Slipper Clutch: Revo Spec Torque-Control-adjustable to provide consistent traction control
• Tires: Alias 2.2 racing tires, stepped pin rear and ribbed front
• Wheels: 2.2" (56mm) Black Chrome finish Tracer 5-spoke
• Body: Traxxas ProGraphix painted body with wing
• Bumpers: Front, Black plastic
• Suspension: Live axle front with centered kingpin
• Camber Tie Rods: Fixed non-adjustable
• Steering Tie Rods: Adjustable with Jato style steel turnbuckles and heavy duty rod ends
• Steering: Bell-crank with laydown servo placement and servo saver new design front steering spindles with 5x11mm rubber sealed bearings

INCLUDES

• Traxxas Bandit VXL, Velineon Brushless motor, Velineon VXL-3s ESC, 26 tooth pinion gear, Black-Chrome tracer 2.2" wheels, radio, 76 spur gear, instructions, wrenches, aftermarket servo adapters, pre-load spacers & shock pistons, battery pad, replacement screws, body clips and washers, 7-cell battery, DC charger, Traxxas
• Stability Management

SPECIFICATIONS

• VEHICLE-
• Length: 16.26" (413mm)
• Width: 10.25 (260mm)
• Height: 7.3" (186mm)
• Weight: 3.0" (1380g) with body
• Wheelbase: 11.58" (294mm)
• Tread: Front- 9.1" (232mm) Rear- 8.25" (209mm) side-to-side at wheel centers
• Front Track: 10.16" (258mm)
• Rear Track: 9.92" (252mm)
• Ground Clearance: 1" (25mm)
• BODY-
• Length: 14.75" (375mm)
• Width: 5.4" (138mm) at rear wheels (widest point)
• 1.5" (39mm) behind from wheels (thinnest point)
• Height: 3.7" (95mm)

COMMENTS

• The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal, affordable upgrade for this vehicle.
• For replacement ball bearings use:
• Qty. Size Location Bearing Set
• 4 5x11mm Front Wheels order 2 DTXC1547
• 4 5x11mm Rear Wheels order 2 DTXC1547
• 6 5x11mm Transmission order 3 DTXC1547
• The TSM Bandit is available in the following colors;
• Blue, TRAD36BB Red, TRAD36RR
• Black, TRAD36LL Silver, TRAD36SS
• Blue/Red, TRAD36BR