HPI Racing 1/10 Sprint 2 Sport RTR w/'69 Mustang RTR-X

HPI109299

HPI Racing

This product is no longer in stock

Your price: $309.99

Fuel TypeElectric

This is the 1/10 scale electric powered, 2.4GHz radio controlled, ready to run HPI 1969 Ford Mustang Sprint 2 Sport Drift Car.

FEATURES

  • Chassis: Composite plastic
  • Drive: Four wheel belt with alloy steel dog bones
  • Motor: 15T with orange anodized aluminum motor mount, and 23T 48P steel pinion gear
  • Radio: 2.4GHz radio with waterproof SF-10W steering servo
  • ESC: HPI SC15WP LiPo compatible waterproof and reversible
  • Battery: 7.2V NiMH 2000mAh with Standard connector
  • Battery Charger: 110V wall type
  • Spur Gear: 48P 90T composite
  • Body: Trimmed and painted highly detailed licensed 1969 Ford Mustang replica with adjustable height body mounts that allow a variety of bodies to be used
  • Differential: Planetary gear type with sealed case
  • Ball Bearings: Full set
  • Wheels: Two sets of 5-Spoke, two tone green with 12mm hex, 1.02" (26mm) wide, 2.00" (51mm) diameter Tires X-pattern radial touring mounted tires with extra set of T- drift tires
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel rotating faster than the outer front wheel during turns
  • Bumper: Front foam
  • Warranty: Two year limited warranty through HPI beginning at date of purchase. Warranty valid only in the U.S., Canada and South America

INCLUDES

  • RTR HPI 1969 Ford Mustang Sprint 2
  • 2.4GHz Radio
  • 15T Brushed Motor
  • Touring Tires
  • Drift Tires
  • Eight Wheels
  • ESC
  • four AA Batteries
  • Wall Charger
  • Instructions

REQUIREMENTS

  • Track equipment

SPECIFICATIONS

Vehicle

  • Length: 17"(431mm)
  • Width: 7.5"-8.0"(190mm to 200mm)adjustable using offset wheels
  • Height: 5"(127mm)
  • Wheelbase: 10"(254mm)

Body

  • Length: 17.4" (441mm)
  • Width: 7.5" (190mm)
  • Height: 4.1" (105mm)

COMMENTS

For Replacement Ball Bearings use:

  • Qty. Size Location Qty Bearing Set
  • 4 5x10mm Front Axle 2  DTXC1535
  • 4 5x10mm Rear Axle 2  DTXC1535
  • 2 4x8mm Steering 1  DTXC1511
  • 2 10x15mm Differential 1  DTXC1595
  • 1 4x8mm Spur Gear Mount 1  DTXC1511

Reviews Reviews (0)

Based on 0 reviews - 0 1 2 3 4 0/5
Filter:
0 1 2 3 4 (0)
0 1 2 3 0 (0)
0 1 2 0 1 (0)
0 1 0 1 2 (0)
0 0 1 2 3 (0)

No customer reviews for the moment.