HPI Racing 1/10 Sprint 2 Sport '69 Camaro RTR

HPI106133

HPI Racing

This product is no longer in stock

Your price: $259.99

Overall rating
Quality
Fun
Value
Fuel TypeElectric

This is the 1/10 scale, electric powered, 2.4GHz radio controlled, RTR HPI On-Road Sprint 2 Sport with the 1969 Chevy Camaro Z/28 Body.

FEATURES

  • Chassis: 3/16" (4mm) thick plastic
  • Drive: Four wheel belt drive
  • Motor: 15 turn Firebolt, aluminum motor mount
  • Radio: 2-channel 2.4GHz with SF-10W waterproof steering servo, and four AA transmitter batteries
  • Electronic Speed Control: SC-15WP waterproof and LiPo capable
  • Battery: HPI 7.2V Plazma NiMH 6-cell 2000mAh stick pack, chassis also accepts saddle packs or 2S LiPo packs
  • Battery Charger: Wall type
  • Ball Bearings: Full set included
  • Shocks: Oil-filled, aluminum bodied
  • Differentials: Planetary gear with metal outdrives
  • Transmission: Single speed
  • Tires: Vintage tread pattern, Front, 1.1" (27mm) wide, 2.5" (65mm) diameter, Rear, 1.2" (31mm) wide, 2.5" (65mm) diameter
  • Wheels: Vintage design five spoke brushed chrome, Front, 1.02" (26mm) wide, 1.6" (42mm) diameter, Rear, 1.2" (31mm) wide, 1.6" (42mm) diameter
  • Pinion Gear: 28 tooth 48 pitch metal
  • Spur Gear: 48 pitch, 87 tooth, composite construction
  • Body: Painted and trimmed 1969 Camaro Z/28 with front spoiler and rear wing
  • Bumper: Front, foam
  • Suspension: Fully adjustable
  • Ackerman: Adjustable, Ackerman describes the effect of the inner front wheel turning faster than the outer front wheel during turns
  • Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
  • Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
  • Steering: Bell-crank type with servo saver
  • Warranty: Two year limited warranty through HPI beginning at purchase date. Valid only in the USA, Canada and South America

INCLUDES

  • HPI On-Road Sprint 2 1969 Camaro with brushed motor
  • electronic speed control
  • painted body
  • tires
  • foam inserts
  • wheels
  • 28 tooth pinion gear
  • 87 tooth spur gear
  • 2.4GHz radio
  • steering servo
  • decal sheet
  • 4 AA transmitter batteries
  • instructions
  • 7.2V NiMH battery
  • wall charger

REQUIREMENTS

  • Misc. Items: Building and track equipment

SPECIFICATIONS

VEHICLE

  • Length: 17" (431mm)
  • Width: 7.5" (190mm)
  • Height: 5" (127mm)
  • Wheelbase: 10" (255mm)
  • Front Track: 7.38" (187.5mm) side to side at outer edges of wheel
  • Rear Track: 7.7" (197mm)
  • Front Tread: 6.4" (162mm)
  • Rear Tread: 6.6" (167mm) side-to-side at wheel centers
  • Ground Clearance: 0.5" (13mm)

BODY

  • Length: 17.5" (444mm)
  • Width: 8.1" (205mm) at rear wheels (widest point) 7.5" (190mm) behind from wheels (thinnest point)
  • Height: 4.1" (104mm)

COMMENTS

For Replacement Ball Bearings use:

  • Qty. Size Location Qty. Bearing Set
  • 4 5x10mm Fr Wheels 2  DTXC1535
  • 4 5x10mm Rear Wheels 2  DTXC1535
  • 2 10x15mm Fr Diff 1  DTXC1595
  • 2 2x8mm Fr Diff 1  DTXC1523
  • 2 10x15mm Rear Diff 1  DTXC1595
  • 2 2x8mm Rear Diff 1  DTXC1523
  • 2 4x8mm Servo Saver 1  DTXC1511
  • 2 4x8mm Middle Lay Shaft 1  DTXC1511

Write a review

HPI Racing 1/10 Sprint 2 Sport '69 Camaro RTR

HPI Racing 1/10 Sprint 2 Sport '69 Camaro RTR