Traxxas Castle Sidewinder 3 & SCT ESC Cage (Black)View larger

RPM ESC Protection Cage for Castle Sidewinder 3, Sidewinder SCT ESCs (Black)

RPM73272

RPM

Warning: Last items in stock!

Your price: $9.95

UseUpgrade

The RPM ESC Cage for both the Castle Sidewinder 3 & Sidewinder SCT ESCs fits in the stock location on the Traxxas Slash 2wd, Slash 2wd LCG, Slash 4×4, Slash 4×4 LCG, Stampede 4×4 & Rally, while also working on other Traxxas 1/10th scale vehicles as well (see “Tech Notes” below). 

RPM cage allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job. Furthermore, RPM left air channels along the sides of the ESC to allow air movement along the sides of the case, helping to keep the ESC cool. 

Each ESC Cage is designed to simplify ESC installation and maintenance of the vehicle. Two screws hold the entire assembly to the chassis, that’s it! No more struggling with gooey double-sided tape to remove the ESC to clean your vehicle or transfer the electronics to another car. It’s so quick, you can transfer the entire assembly from one vehicle to the next in about a minute! 

RPM include a separate, encased on / off switch mount that bolts directly to RPM cage in one of four locations / orientations for extreme versatility. Since the switch attaches to the cage, no extra time is needed to remove it during maintenance or if you decide to swap the ESC between vehicles. Alternately, you can mount the switch anywhere you’d like simply by drilling and tapping two 2mm holes. 

Each RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons for a lifetime of worry-free performance. Each cage is molded in blue or black and backed by RPM's limited lifetime warranty against breakage. 

Tech Notes: The RPM ESC Cage for the Sidewinder 3 & Sidewinder SCT series ESCs works with Castle Sidewinder #010-0115-00, # 010-0115-01, # 010-0115-02, # 010-0115-03, # 010-0115-04 & # 010-0123-00. While RPM ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 4×4 LCG, Slash 2wd, Slash 2wd LCG, Rally, Stampede VXL 2wd, Rustler VXL & Bandit VXL. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate is used – Rustler XL-5, Stampede XL-5 2wd, Craniac, Skully & Bandit XL-5.

No customer reviews for the moment.

30 RELATED PRODUCTS